Attività

Why is fiberglass mesh needed?

Composite sheets of fiberglass mesh for marble reinforced polycarbonate were prepared by hot compress molding. The effects of lay-up structure, lay-up angle, area density of fiberglass mesh and the thickness of PC film on tensile property were studied. The results reveal that the alternative lay-up structure of reinforcement mesh and matrix film is optimal and tensile property declines as lay-up angle increases. Fiberglass mesh with lower area density is appropriate for thinner composites. Composite sheets fabricated with thinner PC film show better tensile property. SEM analysis shows that alternative lay-up structure is favorable to the immersion of the fiber bundle of marble mesh cloth with low area density in the melting matrix, and thus the improvement of tensile property.

This paper investigates the effect of surface treatment for glass fiber, stainless steel wire mesh on tensile, flexural, inter-laminar shear and impact properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites. The glass fiber fabric is surface treated either by 1 N solution of sulfuric acid or 1 N solution of sodium hydroxide. The stainless steel wire mesh is also surface treated by either electro dissolution or sand blasting. The hybrid composites are fabricated using epoxy resin reinforced with glass fiber and fine stainless steel wire mesh by hand lay-up technique at room temperature. The hybrid composite consisting of acid treated glass fiber and sand blasted stainless steel wire mesh exhibits a good combination of tensile, flexural, inter-laminar shear and impact behavior in comparison with the composites made without any surface treatment. The fine morphological modifications made on the surface of the glass fiber and stainless steel wire mesh enhances the bonding between the resin and reinforcement which inturn improved the tensile, flexural, inter- laminar shear and impact properties.

The fiberglass mesh filter is an inorganic non-metallic material with excellent performance. It has a wide variety of advantages. The advantages are good insulation, strong heat resistance, good corrosion resistance, and high mechanical strength, but its disadvantages are brittleness and poor wear resistance. It is made of glass balls or waste glass as raw materials through high-temperature melting, drawing, winding, weaving, and other processes. In this article, we will take a closer look at the characteristics and types of fiberglass mesh filters. 

Characteristics of Fiberglass Mesh Filters

The filter has high tensile strength and low elongation (3%).

The filter has a high elastic coefficient and good rigidity.

The filter has large elongation within the elastic limit and high tensile strength, so it can absorb impact energy.

The filter is made of inorganic fiber, which is non-flammable and has good chemical resistance.

Its water absorption is small.

High-temperature resistance.

High filtration efficiency.

Types of Fiberglass Mesh Filters

ULPA（Ultra Low Penetration Air) Filter

ULPA (Ultra Low Penetration Air) filter has a filtration efficiency of more than 99.999% for 0.1~0.2μm particles, smoke and microbes, and other dust particles. 

ULPA filter characteristics: Its filter element is made of ultra-fine glass fiber filter material by gluing and folding. The outer frame can be made of laminated wood, galvanized copper, stainless steel, and aluminum alloy, and it is tightly bonded by polyurethane glue. It has the characteristics of lightweight, large air permeability, dust collection rate as high as 99.95-99.999%, and alkali resistance, and high-temperature resistance.

ULPA filter applications: It is suitable for class 10000-100 clean systems, air conditioning systems, so the product has been widely used in electronics, microelectronics, semiconductors, optical devices, biological and medical circuits, cameras, and optical instruments, precision machinery, and other fields.

High-Temperature Air Filter

The high-temperature air filter still has a partition structure. It is assembled with high-temperature resistant glass fiber or ultra-fine glass fiber filter paper, aluminum foil partition, stainless steel frame, and special high-temperature resistant sealant. 

High-temperature air filters are mainly used in ultra-clean ovens that require drying in the production process of food, pharmaceuticals, etc., or high-temperature air purification equipment and systems. The maximum working temperature is 350 degrees.

High Humidity Resistant Air Filter

The high-humidity air filter has a partition structure, using special moisture-proof ultra-fine glass fiber filter paper, special rubber sheet or aluminum foil partition, galvanized sheet, or aluminum alloy profile frame. It is suitable for high humidity under normal temperature and pressure, especially in high humidity environments such as infusion production in the pharmaceutical industry. The maximum working humidity is 100%.

The Disadvantage of Fiberglass Mesh Filters

Due to the poor ductility of glass fiber, the glass fiber filter is easily damaged, so be careful when installing it.

Conclusion 

Thank you for reading our article and we hope it can help you to have a better understanding of the characteristics and types of marble fiberglass cloth. If you want to learn more about fiberglass mesh filters, we would like to advise you to visit Stanford Advanced Materials (SAM) for more information.