Attività

Useful information on External Gear Pumps

A gear pump is a type of positive displacement (PD) pump. Gear pumps use the actions of rotating cogs or gears to transfer fluids.  The rotating gears develop a liquid seal with the pump casing and create a vacuum at the pump inlet.  Fluid, drawn into the pump, is enclosed within the cavities of the rotating gears and transferred to the discharge.  A gear pump delivers a smooth pulse-free flow proportional to the rotational speed of its gears.

There are two basic designs of gear pump: internal and external (Figure 1).  An internal gear pump has two interlocking gears of different sizes with one rotating inside the other.  An external gear pump consists of two identical, interlocking gears supported by separate shafts.  Generally, one gear is driven by a motor and this drives the other gear (the idler).  In some cases, both shafts may be driven by motors.  The shafts are supported by bearings on each side of the casing.

This article describes plastic gear pump in more detail.

There are three stages in an internal gear pump’s working cycle: filling, transfer and delivery (Figure 2).

As the gears come out of mesh on the inlet side of the pump, they create an expanded volume.  Liquid flows into the cavities and is trapped by the gear teeth as the gears continue to rotate against the pump casing.